Equipment Needed But Not Supplied - HP 8517B Operating & Service Manual

Table 6-1
Tools
2 point Pozidriv screwdriver
1 point Pozidriv screwdriver
5/16 inch torque wrench, 90 N-cm (8 in-lb)
5/16 inch torque wrench, 112 N-cm (10 in-lb)
1/2 inch torque wrench, 280 N-cm (25 in-lb)
9/16 inch torque wrench, 470 N-cm (42 in-lb)
20 mm torque wrench, 90 N-cm (8 in-lb)
2.9 mm gage kit
anti-static mat
wrist strap
clip lead
needle nose pliers
wire cutters
T-10 Torx screwdriver
T-15 Torx screwdriver
9/16 inch 50 in-lb torque wrench
9/16 inch nut driver
1/2 inch torque wrench, 280 N-cm (25 in-lb)
100 , 20 watt resistor
1 inch torque wrench, 800 N-cm (72 in-lb)
5/16 inch open end wrench
1/2 inch open-end wrench
1/2 x 9/16 inch thin wrench, fixed
5/16 inch thin wrench
1. Order from Mountz Company, 1080 North 11th Street, San Jose, CA 95112, phone (408) 292-2214, or contact Mountz through the
internet at http://www.mountztorque.com/html/home.htm

Equipment Needed But Not Supplied

Table 6-1 lists the equipment needed to replace the assemblies documented
in the following procedures. See Figure 6-2 to locate the test set assemblies.
Replacement-Procedure Tools Needed
Used for Procedure:
all components
all components
all components and 3.5 mm semi-rigid cables, 2.4/1.85
mm cables
HP 8516A 2.4 mm semi-rigid cables
7 mm, 2.4 mm, 1.85 mm test port connectors
HP 8517B rear panel 2.4 mm connectors
2.4 mm and 1.85 mm test port connectors
port connectors
all components
all components
C1-C4 capacitors
couplers
couplers, B1 fan
all components
all components
test ports
connector repair
connector repair
C1-C4 capacitor removal
coupler removal and test port connector flange removal
fan replacement and test port connector removal
RF input connector
Test port connector removal
3.5 mm, 2.4 mm, 1.85 mm semi-rigid connector
removal
HP 8517B Test Set Replacement Procedures
HP Part Number
8710-0900
8710-0899
8710-1765
8710-1655
8710-1581
8710-1580
8710-1764
Part of HP 85056A Cal Kit
9300-0797
9300-1257
any supplier
any supplier
any supplier
8710-1623
8710-1622
8710-1948
8720-0008
8710-1581
0819-0019
MTB 100 72 lb-in E
any supplier
any supplier
8710-1770
8710-2079
HP 8517B S-Parameter Test Set Manual 6-3
1