Configuration Overview
Telnet
From most Microsoft
systems, users can start a Telnet session from the DOS (command) shell after the
IP address has been set.
For complete information on accessing and using the Telnet UI, see Chapter 4,
"Serial/Telnet User
FTP
The router supports the use of the FTP UI to perform several copy procedures
using the
For more information, see Chapter 5,
28
®
Windows
Interface."
and the
commands.
put
get
®
®
9x, Windows NT
"FTP User
Interface."
Network Storage Router e1200-160
, and Windows 2000
®