Table of Contents
Advertisement
Serial/Telnet User Interface
Active Fabric Configuration
In the Configuration Menu, select 8) Active Fabric Configuration to enter
Active Fabric options.
Figure 65
Figure 65: Active Fabric Configuration menu
Active Fabric Configuration Menu options:
Save Configuration
In the Configuration Menu, A) Save Configuration is used to save any
configuration changes.
The current configuration state is saved in FLASH, which updates the previous
configuration. This configuration is retained across future device resets or power
cycles.
128
is an illustration of the Active Fabric Configuration Menu.
1) Change the number of controller LUNs (default: 1) changes the
number of controller LUNs.
This setting is a number in the range of 0 through 4.
For more information on controller LUN commands, see Appendix B,
"Controller LUN
Commands."
Network Storage Router e1200-160
Advertisement
Table of Contents
Troubleshooting
