Backing up the Router Configuration
To backup the router configuration settings:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
Note:
to store the backup configuration file.
3. Enter the user name and password.
4. Specify binary mode:
5. Specify the filename (with the extension .cfg) using the get command:
Note:
and Ethernet physical address (MAC address) values are not saved in the
configuration file. All other configuration settings are saved.
Network Storage Router e1200-160
ftp <IP address>
where IP address is the IP address of the router.
The default router IP address is 1.1.1.1.
You will need to specify the external directory location where your FTP utility is
The default user name is
HP recommends that the user name and password be changed from the default
values.
bin
get filename.cfg
The file will transfer to the user-specified location.
When backing up a configuration file, the World Wide Name (WWN) values
and the default password is
root
FTP User Interface
.
password
147