Processor Fan Assembly - HP ProLiant DL360 Generation 4 Maintenance And Service Manual

6. Remove the component from the server.
To replace the component, reverse the removal procedure.

Processor Fan Assembly

1. Extend or remove the server from the rack ("Extending the Server from the
2. Remove the access panel ("Removing the Access Panel" on page 18).
3. Loosen the thumbscrew that secures the processor fan assembly to the server.
4. Push on the sheet metal tab near the thumbscrew to separate the fan tray
CAUTION: When replacing the component, be sure the power
converter module is properly seated in the server chassis.
CAUTION: Do not operate the server for long periods without
the access panel. Operating the server without the access panel results
in improper airflow and improper cooling that can lead to thermal
damage.
Rack" on page 17).
connector from the system board connector.
Removal and Replacement Procedures 29