Table of Contents
Advertisement
Connect
The Connect option establishes communication with a device. This function re-establishes
communication with the device if it times out or enables a connection to a new device.
If a device is already connected, the Connect function is disabled until the device is
disconnected or the connection times out.
To re-establish the connection if communication is lost:
1.
From the
menu, select
File
Communication Setup dialog box, which is the communication module through which
connection to the device is established.
2.
Select the communication port from the
3.
Click
. The Communication Setup dialog box closes and the FOX Extenders
Connect
Control Program main screen remains open.
Disconnect
The Disconnect option stops communication with the current device, but leaves the FOX
Extenders Control Program open. Once disconnected, configuration can no longer be done
unless connection is re-established.
To disconnect from the device, select
The status bar at the bottom of the window indicates that the device is disconnected.
Exit
The Exit option closes the FOX Extenders Control Program.
To exit the program, select
Tools Menu
The Tools menu contains options for displaying device information or configuring the device.
Figure 13.
Tools Menu
FOX T USW 203 Universal Switcher • FOX Extender Control Program
. Alternatively, click the
Connect
drop-down list.
Port
from the
Disconnect
from the
menu.
Exit
File
icon. This displays the
menu or click the
File
icon.
23
Advertisement
Table of Contents
