Honda 2006 Accord Sedan Owner's Manual page 60

Parking Brake and Brake System
Indicator
U.S. Canada
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you try to drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tires.
2. If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page 253 .
Supplemental Restraint
System Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
side airbags, passenger's side airbag
automatic cutoff system, side curtain
airbags, automatic seat belt
tensioners, driver's seat position
sensor, or the front passenger's
weight sensors. For more
information, see page 30
Instrument Panel Indicators
U.S. Canada
This indicator comes on when you
turn the ignition switch to the ON
(II) position. If it comes on at any
other time, it indicates that the
passenger's side airbag has
automatically shut off. For more
information, see page
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
. ignition switch to ON (II), and when
the ignition switch is turned to
START (III). If it comes on at any
other time, there is a problem with
the ABS. If this happens, have your
vehicle checked at a dealer. With
this on, your vehicle still has normal
braking ability but no anti-lock
brakes. For more information, see
page 180 .
Side Airbag Off
Indicator
.
31
59