Honda 2006 Accord Sedan Owner's Manual page 118

SCAN The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan for
a station with a strong signal. When
it finds one, it will stop and play that
station for about five seconds.
If you do nothing, the system will
then scan for the next strong station
and play it for five seconds. When it
plays a station you want to listen to,
press the SCAN button again.
Preset Each preset bar or icon
can store one frequency on AM, and
two frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
bar or icon.
For Vehicles with Navigation System
Push the AUDIO DISPLAY button
to view the preset icons.
Use the TUNE, SEEK, or SCAN
2.
function to tune the radio to a
desired station.
Playing the Radio
3. Pick the preset number (1
you want for that station. Press
the left or right side of the bar or
icon and hold it until you hear a
beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
6)
117