If Your Pc Has A Software Problem; If You Have Forgotten Your Password - HP 5/xx Series 4 User Manual

If Your PC Has a Software Problem

If You Have Forgotten Your Password

If you forget the User Password, but not the Administrator password,
carry out the following procedure:
1 Restart the PC. If the keyboard is locked, unplug the power cord
and plug it in again.
2 Wait for
F2=Setup
3 Press to start Setup.
4 Enter the Administrator Password to access the Preferences
menu.
5 Move to the User Password field and set a new User Password.
This will replace the old password which you had forgotten.
6 Press to save the new Password and exit Setup.
If you forget both the User Password and the Administrator
Password:
1 Switch off the PC.
2 Remove the computer's cover.
3 Set switch 5 (PASWD EN) on the system board switch block to
CLOSED.
4 Switch on the PC and allow it to complete its startup routine.
The message "Passwords have been cleared, set
switch 5 to open position before rebooting" will
be displayed.
5 Switch off the computer.
6 Reset switch 5 (PASWD EN) to OPEN.
7 Replace the computer's cover.
8 Switch on the PC and allow it to complete its startup routine.
9 After the Power-On Self-Test has completed, press
prompted to use Setup.
10 Set new User and System Administrator Passwords.
11 Press to save the new passwords and exit Setup.
to be displayed.
5 Troubleshooting Your PC
If Your PC Has a Software Problem
when
English 77