Changing The Battery - HP 5/xx Series 4 User Manual

Hewlett-packard user's guide
Table of Contents

Advertisement

5 Troubleshooting Your PC
If Your PC Has a Software Problem

Changing the Battery

Special care is needed in changing the battery. Instructions for
changing the battery are given below.
You should order replacement battery HP 1420 - 0314 from your local
Sales and Service office, or a Rayovac 2325/2335 or Mitsubishi
BR2325/BR2335, either of which are available from most local stores.
After removing the computer's cover:
1 Remove the old battery by gently sliding it from under the retaining
clip.
2 Place the new battery in the battery holder, with the cross
uppermost, and ensure that it is properly seated.
3 Ensure that the clip is in place and holds the battery firmly.
You can also install an external battery (order number 1420-0513)
which you can order from your authorized reseller.
Install the external battery as follows:
1 After removing the computer's cover, connect the external battery
cable to the battery connector on the system board.
2 Mount the external battery on the backplane, using the self-adhesive
strip supplied.
80
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra vl5 4Vectra vl 5/xx 4 seriesVectra vl 5 4 series

Table of Contents