Installing A 5.25-Inch Drive In The Bottom Shelf - HP 5/xx Series 4 User Manual

NOTE
3 How to Install Accessories In Your PC
Installing Mass Storage Devices
13 Install any other accessories before replacing the cover. Replace the
side bezel. Reconnect all cables and power cords.

Installing a 5.25-inch Drive in the Bottom Shelf

A slim (1-inch high) 5.25-inch front access drive can be installed in the
bottom shelf.
Disk drives ordered from HP are supplied with mounting rails. If you
order your drive from another supplier, you will need to order drive
mounting rails from HP.
1 Carry out steps 1 to 5 in "Installing a 3.5-inch Disk Drive in the
Bottom Shelf" on page 41.
2 Remove the side bracket from the bottom shelf and store it in a safe
place.
44 English