Part 1 - Package Contents - Q-See QC444-403 Quick Installation Manual

PART 1 - PACKAGE CONTENTS

4 Color Cameras with Stands
2 Color Cameras with Stands
QC444 DVR 2 Decoy Cameras
Pre-Installed 2 BNC(M) to RCA(F)
Hard Drive
Power Supply & 4-Way Splitter
Power Supply
for DVR
USB 2.0
Mouse
The appearance
of contents may
differ from images
shown.
(403 & 411)
Manual and
Software CD
(426)
manuals and
software
QC Series
Ethernet
Cable
Adapters
(403 & 411)
Video and Power
2-Way Splitter
Camera Cable
(426)
Remote
Control
PART 2 - DVR CAMERA AND POWER CONNECTIONS
STEP 1: Connect the Cameras
to the Cables
1C
Connect the remaining
connector to one of the
ends on the power
splitter. Repeat for all
cameras.
STEP 2:
Connect the single end
of the power splitter to
the included power supply.
Revised
5/18/11
1A
1B Attach the BNC connector on the power/video cable to a
Video In port on the DVR. Repeat for all cameras.
AUDIO OUT
2 4 2
1 3 1
VIDEO OUT
STEP 3:
Connect the other power supply to the DVR .
STEP 4:
Connect both power supplies to
a surge protector.
IMPORTANT! It is STRONGLY recommended to use a surge protector that
is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating
of at least 400 and a response time of 10 nanoseconds or less.
Connect both camera leads to the matching
ends on the power/video cable.
Repeat for all cameras.
DC 12V
VGA
STEP 5:
Connect thesurge protector
to an outlet.