Table of Contents
Advertisement
3-3. Compensating viewing angle deficiency
When the screen is to be viewed from below, the viewing angle can be compensated for so the screen looks as if it
is being seen from directly ahead.
Adjustable range
-40˚, -20˚, Off
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "Up View" in the "Monitor Settings" menu, and press
The "Up View" menu appears.
3. Select "-40˚", "-20˚", or "Off" with
4. Press
to exit.
Attention
• The setting is turned "Off" in the following cases:
- "Orientation" of the Setting menu is set to "Portrait".
- "sRGB" is selected from the FineContrast mode.
• Depending on the viewing angle, switching the setting may make the screen less visible.
3-4. Enabling / Disabling DDC/CI communication
This function allows you to enable / disable the DDC/CI communication (see
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "DDC/CI" in the "Monitor Settings" menu, and press
The "DDC/CI" menu appears.
3. Select "On" or "Off" with
4. Press
to exit.
Note
• The DisplayPort input of this monitor does not support DDC/CI communication.
Off
-20˚
-40˚
or .
or .
.
.
"Chapter 7 Glossary" (page
.
.
Chapter3SettingMonitor
52)).
27
Advertisement
Table of Contents
