Switch Cover - HP PAVILION TX2500 Maintenance And Service Manual

Switch cover

Description
Switch cover (includes display convertible hinge base cover)
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the keyboard (see
Remove the switch cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the four Phillips PM2.0×7.0 screws that secure the switch cover to the computer.
3. Turn the computer display-side up, with the front toward you.
4. Open the computer.
Battery on page 39).
Keyboard on page 49).
Spare part number
464115-001
Component replacement procedures 51