Table of Contents
Advertisement
Switch cover
Description
Switch cover (includes display convertible hinge base cover)
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the keyboard (see
Remove the switch cover:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the four Phillips PM2.0×7.0 screws that secure the switch cover to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer.
Battery on page
39).
Keyboard on page
49).
Spare part number
464115-001
Component replacement procedures
51
Advertisement
Table of Contents
