Setting Hdmi; Reducing Noise; Selecting How To Display Interlace Signal - Eizo ColorEdge CG276 User Manual

2-8. Setting HDMI

●

Reducing noise

The small noises that occur in dark images are reduced. Use this function to reduce noise and roughness in
images.
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "HDMI Settings" from "Screen", and press
3. Choose "Noise Reduction", and press
4. Select "On" or "Off" with
5. Press to exit.
Attention
• Using the Noise Reduction function may deteriorate fine images.
• When "Pseudo Interlace" is in operation, this function is not available (see
●

Selecting how to display interlace signal

The display method can be selected before the interlace signal is displayed.
Identifying video images automatically and converting them to suitable images
Signals of 24 frames or 30 frames per second for images such as movies, computer graphics, and animations
are automatically identified and the most suitable images are displayed.
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "HDMI Settings" from "Screen", and press
3. Choose "Film Detection", and press
4. Select "On" or "Off" with
5. Press to exit.
Attention
• If distorted images are displayed when "Film Detection" is "On", set "Film Detection" to "Off".
• When "Pseudo Interlace" is in operation, this function is not available (see
28
Chapter2AdjustingScreens
.
or .
.
or .
.
.
"Enabling Pseudo Interlace" (page
.
.
"Enabling Pseudo Interlace" (page
29)).
29)).