Top cover
Description
For use only with computer models equipped with a fingerprint reader
For use only with computer models not equipped with a fingerprint reader
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover and keyboard (see
d.
Speaker assembly (see
e.
Display assembly (see
Remove the top cover:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the 12 Phillips PM2.5×7.0 screws that secure the top cover to the computer.
84
Chapter 4 Removal and replacement procedures
Battery on page
52).
Hard drive on page
62)
Optical drive on page
Switch cover and keyboard on page
Speaker assembly on page
Display assembly on page
55)
74)
76)
Spare part number
486527-001
486526-001
69)