Setting Fax Functions - Toshiba e-Studio 3510C User Functions Manual

3 SETTING ITEMS (USER)

SETTING FAX FUNCTIONS

You can change the initial setting (default setting) of fax and Internet Fax features.
1
Press the [USER FUNCTIONS] button on the control panel to enter
the User Functions menu.
2
Press the [USER] button, and then press the [FAX] button on the
touch panel.
The FAX screen is displayed.
3
Specify the following items as you require.
In the "RESOLUTION" option, press the desired mode button.
In the "ORIGINAL MODE" option, press the desired mode button.
In the "EXPOSURE" option, press light or dark buttons to specify the default expo-
sure manually, or press the [AUTO] button to select auto mode for the default expo-
sure mode.
In the "TX TYPE" option, press the desired mode button.
[MEMORY TX] — Press this to set the Memory TX mode as default transmission
mode that will send after scanning and saving all originals in the memory. This mode
enables multi-address transmission.
[DIRECT TX] — Press this to set the Direct TX mode as default transmission mode
that will send originals page by page after every original has been scanned. This
mode disables multi-address transmission.
The "TX TYPE" option is available only when the optional Fax unit is installed.
4
Press the [Next] button to display the next screen.
88

SETTING FAX FUNCTIONS