Figure 2-14. Removing The Floppy Drive - HP N1010v Service Manual

Screw,
M2.5×4mm (2)
Reassembly Notes
Caution
Do not excessively bend or fold the floppy drive cable. Excessive flexing can damage the floppy
drive cable connections.
•
Connect the floppy drive cable to the motherboard prior to replacing the floppy drive and hard disk
drive guide.
•
When replacing the hard disk drive guide, do not secure the left side to the motherboard. The left
side of the guide gets secured during the top case replacement procedure.
Service Manual

Figure 2-14. Removing the Floppy Drive

Screw,
M2.5×4mm (2)
Removal and Replacement 2-23