Display Assembly - HP G50 Maintenance And Service Manual

Display assembly

Description
15.4-inch, WXGA+BrightView display assembly for use only with HP G50 computer models (includes 2 WLAN antenna
transceivers and cables, microphones and cables, and logo)
Includes webcam module and cable
Does not include webcam module and cable
15.4-inch, WXGA+BrightView display assembly for use only with Compaq CQ50 computer models (includes 2 WLAN antenna
transceivers and cables, microphones and cables, and logo)
Includes webcam module and cable
Does not include webcam module and cable
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the keyboard (see
7. Remove the keyboard cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Remove the wireless antenna cables (2) from the routing channel and clips (3) built into the top
cover.
Battery on page 40).
Keyboard on page 52).
Keyboard cover on page
Spare part number
487603-001
487602-001
485047-001
487046-001
WLAN module on page
54).
Component replacement procedures
49).
57