High/Low Beam Switch; Flash-To-Pass; Map/Reading Lights - Dodge Challenger SRT 2011 Owner's Manual

High/Low Beam Switch

Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you to switch the headlights back to low beam.

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.

Map/Reading Lights

These lights are mounted between the sun visors on the
overhead console. Each light is turned on by pressing the
lens. Press the lens a second time to turn off the light.
These lights also turn on when a door is opened, or when
the UNLOCK button on the Remote Keyless Entry (RKE)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143
transmitter is pressed, or when the dimmer control is
turned fully upward, past the second detent.
Overhead Console
3