Power Button Board - HP Compaq Presario F700 Maintenance And Service Manual

Power button board

Description
Power button board
Before removing the power button board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover (see
5.
Remove the keyboard (see
6.
Remove the power button board:
Disconnect the power button board cable (1) from the system board.
1.
Remove the power button board cable from the clips (2) built into the top cover.
2.
Remove the Phillips PM2.5×5.0 screw (3) that secures the power button board to the computer.
3.
Disconnect the microphone cable (1) and the speaker cable (2) from the power button board.
4.
54 Chapter 4 Removal and replacement procedures
Battery on page 37).
Switch cover on page
Keyboard on page 52).
50).
Spare part number
443153-001