Switch Cover - HP Compaq Presario F700 Maintenance And Service Manual

Switch cover

Description
Switch cover (includes an LED board and LED board cable)
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover:
Position the computer with the front toward you.
1.
Remove the two Phillips PM2.5×10.0 screws (1) and the Phillips PM2.5×5.0 screw (2) that secure
2.
the switch cover to the computer.
Turn the computer right-side up, with the front toward you.
3.
Open the computer as far as possible.
4.
Lift the left and right sides of the switch cover (1) until it detaches from the computer.
5.
50 Chapter 4 Removal and replacement procedures
Battery on page 37).
Spare part number
442889-001