Side Keystone - Barco 3300DLC Owner's Manual

Size
ENTER
for ceiling mount configuration : the lower side of the image is fixed
and only the upper side can be moved to its exact position.

Side keystone

Highlight Side Keystone by pushing the control disk up or down and
press ENTER to select.
The side keystone adjustment is used to align the image if the
projector is mounted as a non standard projection angle.
Push the control disk to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disk to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disk to the right. The number indication below
the bar scale will be positive.
5975119A BARCODATA 3300DLC 121098
Random Access Adjustment Mode
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with
then <ENTER>
<EXIT> to return.
F ixed sides
Vertical size
adjustment
Example for table mount configuration
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with
then <ENTER>
<EXIT> to return.
or
H orizontal size
adjustm ent
or
7-11