File Service; Load File - Barco 3300DLC Owner's Manual

Random Access Adjustment Mode

File service

Highlight File Service by pushing the control disk up or down and
press ENTER to select. The File service menu will be displayed.
ENTER displays the File Service menu;
EXIT returns to the Path selection menu.
ADJUST returns to operational mode.
The following file manupulations are possible :
- Load : installation of a file for a new source.
- Edit : editing a loaded file to the source specs.
- Rename : renaming a file.
- Copy : copying a file to a new file.
- Delete : deleting an existing file.
- Options : way of sorting the files.

Load file

ENTER
ENTER
ENTER
Press ENTER to confirm your new creations or EXIT to return to the load
file menu.
7-2
ENTER
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
AUDIO TUNING
GEOMETRY
Select with or
then <ENTER>
FILE SERVICE
<EXIT> to return.
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with
then <ENTER>
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
LOAD FILE
Select with or
FILTER LIST [All]
then <ENTER>
Filename Src
<EXIT> to return.
-----------------------------------------------------
ntsc .s01 1
ntsc .c01 1
ntsc .s03 3
-----------------------------------------------------
Active file : ntsc.c50
Select with or
<ENTER> to accept
<EXIT> to return.
CONFIRM
LOAD FILE
Create file
ntsc.c02
based on file
ntsc.s01?
<ENTER> to confirm
<EXIT> to return
5975119A BARCODATA 3300DLC 121098
or
Resolution
675x240i
675x240i
675x240i
,