Axis PrintPoint 140 BJC User Manual page 59

Section 5: Setting Up - OS/2
Share the Print
Queue
58
A print queue must be made a shared resource before it can be
accessed from other computers (clients or other servers).
Open an OS/2 window and issue the following command:
NET SHARE <queue_name> /PRINT
where <queue_name> is the name of the queue created above.
To share a printer resource when using OS/2 Warp with IBM Peer
service, follow the steps below:
1. Click the right mouse button on the printer object.
2. Select Share and then Start sharing. In the dialogue box, enter a
Description.
3. Select the check-box Start sharing at LAN workstation startup.
4. Click OK.
To share a printer resource when using LAN server 4.0, follow the
steps below:
1. Open LAN Server Administration.
2. Open your domain and then Resource Definition.
3. Drag and drop a printer from the template.
4. Enter the Alias name, select a Server name and the previously
created Spooler Queue Name.
5. Click OK.
The setup is completed and you can now print through your AXIS
PrintPoint 140 BJC.
AXIS PrintPoint 140 BJC User's Manual