Hard Drive - HP CQ60 Series Maintenance And Service Manual

Hard drive

✎
The hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and
hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit.
Description
120-GB, 5400-rpm
160-GB, 5400-rpm
200-GB, 5400-rpm
250-GB, 5400-rpm
320-GB, 5400-rpm
Hard Drive Hardware Kit
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Loosen the two Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.
2. Lift the right side of the hard drive cover 2, swing it up and to the left, and remove the cover. The hard drive
cover is included in the Plastics Kit, spare part number 486621-001.
Removal and replacement procedures
"Battery" on page 4-7).
Spare part number
504072-001
498478-001
505971-001
498477-001
498476-001
504059-001
4–10