Print Server; Route Settings - TP-Link Archer D7 User Manual

Archer D7 AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
To add a new share folder for your media server, please follow the instructions below:
a) Click Add New Folder button, and you will see the screen as shown in Figure 4-62.
b) Enter the name of the share folder in Share Name field.
c) Click the Apply button to apply the configuration.
Click the Scan now to scan all the share folders immediately. You can also select the Auto-scan,
at same time, select an auto scan interval time by drop-down list. In this case, the media server will
auto scan the share folders.

Note:
The max share folders number is 6. If you want share a new folder when the numbers has been
reached to be 6, you can delete a share folder and then add a new one.

4.11.6 Print Server

Choose menu "USB Settings"→"Print Server", you can configure print server on this page as
shown below.
There are three states of the print server, they are as follows:
Online: Indicates the print service has been turned on, and no user is using the print

services at present. You can click the "Stop" button to stop the print service.
Offline: Indicates the print service feature is disabled. You can click "Start" button to start

the print service.
Busy: Indicates the print service has been turned on, but at this moment other users are

using print services.

4.12 Route Settings

Choose "Route Settings", it includes four menus: Default Gateway, Static Route IPv6 Static
Route and RIP Settings. The detailed descriptions are provided below.
Figure 4-62
Figure 4-63
72