Wps Settings - TP-Link Archer D7 User Manual

Archer D7 AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
 Channel Width: Select the channel width from the drop-down list . The default setting is
automatic, which can adjust the channel width for your clients automatically.

Note:
If 11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel Width selecting
field will turn grey and the value will become 20M, which is unable to be changed.
 Enable SSID Broadcast: When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the modem router. If you select the
Enable SSID Broadcast checkbox, the wireless router will broadcast its name (SSID) on the
air.
 Enable WDS: Check this box to enable WDS. With this function, the modem router can bridge
two or more Wlans. If this checkbox is selected, you will need to set the following parameters
as shown in the figure below. Make sure the following settings are correct.
SSID (to be bridged): The SSID of the AP your modem router is going to connect to as a

client. You can also use the search function to select the SSID to join.
 BSSID (to be bridged): The BSSID of the AP your modem router is going to connect to as a
client. You can also use the search function to select the BSSID to join.
 Scan: Click this button, you can search the AP which runs in the current channel.
Key type: This option should be chosen according to the AP's security configuration. It is

recommended that the security type is the same as your AP's security type
WEP Index: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX). It

indicates the index of the WEP key.
 Authentication Type: This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX). It indicates the authorization type of the Root AP.
:
 Password If the AP your modem router is going to connect needs password, you need to fill
the password in this blank.
Click Save to save your settings.

4.8.2 WPS Settings

This section will guide you to add a new wireless device to an existing network quickly by WPS
(also called QSS) function.
a). Choose menu "WPS Settings", and you will see the next screen (shown in Figure 4-32).
44