Table of Contents
Advertisement
1)
Degree of soil
Programme
Fresh soil
3)
Crockery and
cutlery
4)
Normal soil
Crockery and
cutlery
All
5)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the programme duration and the consumption values.
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme duration.
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil.
5) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
Options
Multitab option
Activate this option only when you use the com-
bi detergent tablets.
This option deactivates the flow of rinse aid and
salt. The related indicators are off.
The programme duration can increase.
Activating the multitab function
Activate or deactivate the multitab function
before the start of a programme. You can-
not activate or deactivate this function while a
programme operates.
1. Press the on/off button to activate the appli-
ance.
2. Make sure that the appliance is in setting
mode. Refer to 'SETTING AND STARTING
A PROGRAMME'.
www.zanussi.com
Type of load
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
Programme
phases
30
155 - 165
12
3. Press and hold function buttons (D) and (E)
at the same time until the multitab indicator
comes on.
The function stays on until you deactivate
it. Press and hold function buttons (D) and
(E) at the same time until the multitab indicator
goes off.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the
rinse aid dispenser are full.
Duration
Energy
(min)
(kWh)
0.9
1.0 - 1.1
0.1
Water
(l)
9
13 - 15
4
5
Hide quick links:
Advertisement
Table of Contents
