Operating Sequence - Electrolux EW 851 F Installation And Instruction Manual

Operating sequence

1. Place the laundry in the drum
P0004
2. Measure out the detergent into the dis-
penser drawer
P0876
the prewash, pour the amount of detergent required
into the «prewash» compartment.
3. Add the liquid additive if required
P0877
4. Select the required options.
5. Select the required temperature
P0881
12
Open the door
depressing the button
.
Place the garments to be
washed inside the drum
one by one, laying them
as flat as possible. Close
the door ensuring that
the catch clicks into
place.
Pull out the detergent
dispenser drawer from
the control panel.
Pour the detergent into
the main wash compart-
ment. Follow the deter-
gent manufacturer's gui-
delines for the amount
required.
If you wish to carry out
Pour the softener, if
required, into the com-
partment marked .
Do not exceed the MAX
level.
Turn the temperature
selector dial until the tem-
perature coincides with
the marker.
6 Select the programme
by
P0889
7 Start the machine
P0080
8. At the end of the programme
The appliance stops automatically.
If you have selected a gentle programme, the water
of the last rinse must be drained before opening the
door.
Wait one or two minutes before opening the door
to give the electric locking mechanism time to release
it.
The door can be opened when the door locked light is
off.
Release the ON/OFF button to switch the machine
off. The operating pilot light goes out.
Release the button(s).
Turn the water tap off and unplug the machine from
the mains.
Open the loading door and remove the laundry.
Ensure that the drum is completely empty by turning it
with one hand.
Leave the door ajar for a while to eliminate the steam.
Turn the programme
selector knob to the desi-
red position.
Depress the ON/OFF
button.
The operating pilot light
and door locked light illu-
minate and the machine
starts working.