Bradford White EFR160T120 Series Installation & Operating Manual page 65

Ef series ultra high efficiency gas water heater

Hide thumbs Also See for EFR160T120 Series:

Table of Contents

Error Codes and Error History Display:

If there is an operating problem with the water heater, an error code number will appear on the water heater

display with "Service Needed" to the right of the "Status" indicator. The error code label is located below the

water heater display and the following section in this Installation and Operating Instruction Manual explains the

error codes with corrective actions to repair the water heater.

Example of Error Code in the Display:

Error Code History:

In "Service Mode" pressing the "Select" button after the "Software Version" (item 8 in the previously

described sequence of service modes) will show an error code history, if there have been any previous

operating problems with the water heater. If the display shows --, there is not a current error code.

The Water Heater Display will provide up to 10 previous error codes. The oldest error code will be stored in

code index #1 and the most recent in code index #10 (if there are 10 error codes).

To view previous error codes:

Step 1:

In "Service Mode" press the "Select" button until the next display after the "Software Version". If there are no current error

codes, the display will show -- .

No Current Error Code

idle

Service Needed

SELECT

idle

Status



SELECT

SET

°F

Operational

SET

Table of Contents