AMX NXA-WAPZD1000 Operation/Reference Manual page 149

FIG. 56 SpeedFlex interface
FIG. 57 Click the download link for the target client's operating system
NXA-WAPZD1000 ZoneDirector Smart WLAN Controller
A progress bar appears below the speedometer as SpeedFlex generates traffic to measure the
downlink or uplink throughput. One throughput test typically runs for 10-30 seconds. If you're
testing AP throughput and you selected both Downlink and Uplink options, both tests should take
about one minute to complete.
When the tests are complete, the results appear below the Start button. Information that is shown
includes the downlink/uplink throughput and the packet loss percentage during the tests.
Troubleshooting
145