Care And Cleaning - Sunbeam StickMaster SM8700 Instruction Booklet

Care and Cleaning

After each use
1. Always remove the detachable shaft of the
stick blender.
Note: Do not immerse, that is, soak the
detachable shaft of the stick blender in water
because over time the lubrication on the
bearings can wash away.
2. Wash the detachable shaft under running
water, without use of abrasive detergents.
3. When you have finished cleaning the
detachable shaft of the stick blender, place
it upright so that any water which may
have got in, can drain out.
4. The beaker can be washed in hot soapy
water.
5. Dry thoroughly.
Important: Blades are extremely sharp, handle
with care.
10
For a quick wash up
Between processing tasks, hold the stick
blender in the beaker half filled with water
and depress the power button for a few
seconds.
Dishwasher Use
All plastic components deteriorate through
prolonged dishwasher use. However, the
beaker is tolerant to dishwasher use.
Note: Place only on the top rack of the
dishwasher.
Important: Motor housing and charging stand
are not dishwasher safe.
Motor Housing
Clean the motor housing with a damp cloth.
Important: Ensure that the motor housing is
not immersed in water or any other liquid.