Program Tracks; Play From Bluetooth-Enabled Devices - Philips BTM3160 User Manual

Program tracks

You can program a maximum of 20 tracks.
1
Press PROG to activate the program
mode.
2
For MP3 tracks, press
album.
3
Press / to select a track, and then
press PROG to confirm.
4
Repeat steps 2-3 to program more tracks.
5
Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press .
Play from Bluetooth-enabled
devices
Note
•
The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•
Any obstacle between the system and the device can
reduce the operational range.
•
Compatibility with all Bluetooth devices is not
guaranteed.
10 EN
/ to select an
CD
FM AUDIO IN
PRESET/ALBUM
BTM3160
1
Press FM/ repeatedly to select the
Bluetooth source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'PHILIPS BTM3160' on your
Bluetooth enabled device and if necessary
input '0000' as the paring password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps twice.
4
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•
The unit can memorize up to 8 previously connected
Bluetooth devices.
BT
3
PIN
0000
3