Audio menu
Audio
Sound adjust
c button
Selected item
For weaker treble
Treble
For weaker bass
Bass
Decrease audio from
Balance
the right speaker
SRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the same
as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects from
the "Audio" setting.
Selected item
SRS TruSurround HD™ creates a high
On
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround sound.
Outputs the normal sound.
Off
Bass enhancer
powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced sound.
Selected item
Bass enhancer function is on.
On
Outputs the normal sound.
Off
Clear voice
This function emphasises speech against background
noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is "On".
• For resetting all "Sound adjust" items to the factory preset
values, press a/b to select "Reset", press ENTER, press
a/b to select "Yes", and then press ENTER.
14
AV mode
Sound adjust
SRS TS HD
Bass enhancer
Clear voice
Reset
d button
For stronger treble
For stronger bass
Decrease audio
from the left speaker
Description
Description
ECO menu
ECO
No signal off
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving no
programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
No operation off
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
Setup menu
Setup
Child lock (ATV and DTV input mode only)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
1
Repeat steps 1 to 2 in Menu operation.
2
Press a/b to select "Child lock", and then press
ENTER.
3
If you already set the password, enter it here.
4
Press a/b to select "Change password", and
then press ENTER.
5
Enter the 4-digit number as a password using
0 — 9.
6
Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• To view a locked channel you must enter a password. When
you select a locked channel, "Child lock has been activated"
is displayed.
• Press ENTER to display the password input window.
No signal off
No operation off
Child lock
4
HDMI auto view
Link operation
Audio return channel
Auto wide
Quick start
Text language
Digital setup