Attaching The Stand - Sharp Aquos LC-60LE650X Operation Manual

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confi rm that there are screws with the stand unit.
(Eight long screws and four short screws)
2
Attach the supporting post for the stand unit onto the base using the long screws with a screwdriver as shown.
3
Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the
base area).
4
Attaching the stand cover.
1 Insert the stand cover.
2 Insert and tighten four short screws into the holes of the stand cover.
NOTE
• To detach the stand unit, perform the steps in reverse order.
• A screwdriver is not supplied with this product.
Supporting
post
Soft cushion
Front
3