HP 720 Series User Manual page 54

Problem
My image is
blurry.
My image is
too dark.
54
Possible cause Solution
Your subject
was too close
to the camera
lens.
You moved the
camera while
you took the
picture.
The light is low
and the flash is
turned off.
There was not
enough light.
The flash was
on, but the
subject was
too far away.
A light shone
behind the
subject.
Your finger
blocked the
flash.
Do not try to get closer than the
camera's minimum focus range
(see Appendix C: Specifications
on page 77).
Hold the camera steady as you
press the Shutter
tripod.
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or
use the flash.
Wait for natural lighting
conditions to improve, add
indirect lighting, or adjust the EV
compensation.
Make sure your subject is within
the flash working distance (see
Appendix C: Specifications
page 77) or try turning flash off
(will require longer exposure).
Use the Flash On
brighten the subject when there
is a bright light such as the sun
or a window behind your
subject.
Be sure to move your fingers
away from the flash when you
take a picture.
hp photosmart 720 user's manual
button or use a
on
setting to