Connecting A Microphone - Samson Expedition XP112a Owner's Manual

Connecting a Microphone

Follow these steps to connect a dynamic microphone to your Expedition loudspeaker:
•
Set the Expedition XP112a/XP115a Power switch to the off position.
•
Turn the VOLUME control fully counterclockwise to the off position.
•
Connect the power cable to an AC socket.
•
Using a standard XLR cable, plug a dynamic microphone into the Expedition's XLR
INPUT.
•
Set the SENSITIVITY switch to the MIC position.
•
Switch the Power switch to the ON position.
•
While speaking or singing into the microphone, slowly raise the VOLUME control
until you have reached the desired level.
•
For larger sound reinforcement you can run several monitors using the Link Output
to daisy-chain one Expedition to another. Set the input Sensitivity on the additional
cabinets to the LINE level position.
8