Framing And Clearances; Selecting Appliance Location - Heat & Glo Cerona-36 Owner's Manual

3 3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
H
A
F
Figure 3.1 Appliance Locations
8
A
B
C
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 3.D)
• Vent Clearances and Framing (Section 6).
G
CERONA-36 A
Inches 51 42-1/8
Millimeters 1295 1070
CERONA-42 A
Inches 56-5/8 49-1/8
Millimeters 1438 1248
Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. i • 6/09
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
Note: For actual appliance dimensions refer to Sec-
tion 16.
D
ALCOVE
INSTALLATION
E
B
B C D E
73-1/4 36 65-1/2
1861 914 1664
B C D E
80-1/8 36 72-1/2
2035 914 1842
WARNING
F G H
1/2 22-1/4 16
13 565 406
F G H
1/2 22-1/4 18-3/4
13 565 476