Jeep 2013 Grand Cherokee User Manual page 78

ELECTRONICS
• Only the mobile phone's phonebook is downloaded. The SIM card phonebook is
not part of the Mobile phonebook.
• This downloaded phonebook cannot be edited or deleted on the Uconnect
Phone. These can only be edited on the mobile phone. The changes are transferred
and updated to Uconnect
Making A Phone Call
• Press the "Phone" button
• (After the BEEP), say "dial" (or "call" a name).
• (After the BEEP), say number (or name).
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect
.
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, press the "Voice Command" button
• (After the BEEP), say "mute" (or "mute off").
Transfer Ongoing Call Between Handset And Vehicle
• During a call, press the "Voice Command" button
• (After the BEEP), say "transfer call".
Changing The Volume
• Start a dialogue by pressing the "Phone" button
during a normal call.
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable
level while the Uconnect
Uconnect is different than the audio system.
®
• Any voice commanded system should be used only in safe driving conditions
following applicable laws regarding phone use. Your attention should be
focused on safely operating the vehicle. Failure to do so may result in a
collision causing you and others to be severely injured or killed.
• In an emergency, to use Uconnect
• turned on,
• paired to Uconnect
• and have network coverage.
76
Phone on the next phone connection.
®
.
system is speaking. Please note the volume setting for
®
WARNING!
® Phone, your mobile phone must be:
Phone,
®
, press the Phone button
®
.
.
.
, then adjust the volume
®