Jeep 2013 Grand Cherokee User Manual page 13

• In case the Key Fob battery is dead, use the emergency key to open the door. If the
vehicle is equipped with Keyless Enter-N-Go™, remove the ENGINE START/STOP
button by inserting the metal part of the emergency key under the chrome bezel at
the 6 o'clock position and gently pry the button loose.
NOTE:
The ENGINE START/STOP button should
only be removed or inserted with the
ignition in the LOCK position (OFF posi-
tion for Keyless Enter-N-Go™).
• With the ENGINE START/STOP button
removed, start the vehicle by inserting
the Key Fob in the ignition and turning
to the START position.
• If your vehicle battery becomes low or dead, your Key Fob will become locked
in the ignition.
• Do not attempt to remove the Key Fob while in this condition, damage could
occur to the Key Fob or ignition module. Only remove the emergency key for
locking and unlocking the doors.
• Leave the Key Fob in the ignition and either:
• Jump Start the vehicle.
• Charge the battery.
• Contact your authorized dealer for assistance on how to remove the Key
Fob using the manual override method.
GETTING STARTED
CAUTION!
11