Ducati SuperBike 1098S Use And Maintenance Manual page 26

Visualizzatore dati memorizzati (LAP Memory)
Displays the data saved with the LAP function: lamp time,
MAX speed and MAX rpm.
To display the saved times, go into the menu and select
the "LAP MEM" page.
From this page, if you hold button (1, fig. 8) in position B "▼"
Press B
for 3 seconds, the data for the first lap will appear. The
display will show the lap number, lap time, MAX speed
E
and the MAX rpm reached for the lap in question.
If you switch the button (1, fig. 8) to position B "▼",
the display scrolls through the 30 saved times, before
st
returning to the 1 lap.
Press B. . x 19
If you hold the button (1, fig. 8) in position B "▼" for
3 seconds while displaying the saved times, the display
immediately resets all the saved times. In this case, if the
LAP function was active, it is switched off automatically.
The MAX speed saved is the speed shown on the display
in Lap function.
During saving, if the MAX speed shown exceeds 299 km/h
B= On 3 sec.
(186 mph), the speed reached is displayed (e.g. 316 km/h).
Reset o f al l ti me s i n me mory
If there is no reading in the memory, the 30 times are shown,
with the displaying "00.00.00", MAX rpm = 0 and MAX
speed = 0.
During the lap, if the engine reaches one of the two
thresholds before the limiter or the limiter itself, the
respective warning lights (10, fig. 4) come on during
Press B. . x 19
viewing of the saved times.
fig. 20
26