Using Bluetooth Devices - Gigaset SL610H pro User Manual

Using Bluetooth devices

Changing the set destination
number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 25).
Cancelling/deactivating the room
monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There are no further room
monitor calls. The other room monitor set-
tings on the handset (e.g., no ringtone) will
remain activated until you press the display
§OFF§
key on the handset.
To reactivate the room function with the
same phone number:
¤
Reactivate and save with
¢
( page 25).
26
§OFF§
to
§Save§
Using Bluetooth devices
Before you can use your Bluetooth device,
activate Bluetooth, ensure the devices are
visible and then register the handset.
You can register one Bluetooth headset to
the handset. You can also register up to five
data devices (PCs, PDAs and mobile phones)
to send and receive directory entries as
vCards or exchange data with the computer
¢
( page 37).
To use the phone numbers, dialling codes
(country and area code) must be stored in
¢
the directory ( page 32).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Activating/deactivating Bluetooth
mode
¢ ¢
v ò
Activation
§Change§
Press to activate or deactivate
Bluetooth mode (³ = activated).
Registering Bluetooth devices
The distance between the handset in
Bluetooth mode and the activated
Bluetooth device (headset or data device)
should be no more than 10 m.
Please note
u
If you register a headset, any headset
that is already registered will be over-
written.
u
If you would like to use a headset with
your handset that is already regis-
tered to another device (e.g., to a
mobile phone), please deactivate this
connection before you start the regis-
tration process.
ò
¢ ¢
v
Search for Headset/Search
Data Device
The search can take up to 30 seconds.
Once the device has been found, its name is
shown on the display.