Using the phone
If Eco Mode+ (
ner of the display.
Your phone is now ready for use!
Connecting the headset
Connecting the USB data cable
The mini USB connection is on the
underside of your Gigaset handset.
You can connect a standard USB
data cable with a USB mini-B con-
nector to synchronise your handset
with a PC. To use this function, the
Gigaset QuickSync software must be installed (
Please note
Please connect your handset directly to the PC; do not connect via a USB hub.
Using the phone
Using the control key
Below, the side of the control key that you must press in the
respective operating situation is marked in black (top, bottom,
right, left, centre), e.g., v for "press right on the control key" or
w for "press the centre of the control key".
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u
In idle status the key opens the main menu.
u
In submenus, selection and input fields, the key takes on the function of the
display keys
12
¢
page 23) is activated, the ¼ icon is displayed in the top left cor-
You can connect a headset to the left-hand side of
your telephone with the 2.5 mm jack connector
(available from Service).
See the relevant product page at www.gigaset.com
for information on recommended headsets.
The headset volume corresponds to the settings for
the earpiece volume.
§OK§
§Yes§
§Save§
§Select§
,
,
,
¢
page 37).
§Change§
or
.