Testing The Modem Connections - Motorola SURFboard SB6182 User Manual

Testing the Modem Connections

Perform the following modem connectivity test to verify that all the components were connected
properly:
1. Power ON your computer and then log in.
2. Check that the POWER, RECEIVE, SEND, and ONLINE front panel LEDs on the modem light
up in sequential order. See
Note: The ONLINE LED should light up after the modem is provisioned (activated).
If an LED did not light up, contact your service provider for assistance.
3. Open a web browser on your computer, such as Internet Explorer, Firefox, Google Chrome,
or Safari.
4. Type a valid URL (www.motorola.com) in the address bar and click or press Enter. If the
web page did not open, see
service provider.
SB6182 DOCSIS 3.0 Cable Modem • User Guide
587919-001-a
Front Panel for additional LED status information.
Troubleshooting Solutions for more information or contact your
B
5