Confi Guring Current Time And Day Settings Manually; To Change The Current Time Setting Manually; To Change The Current Day Setting Manually; Checking The Current Time In A Different Time Zone - Casio 5239 Operation Manual

Operation Guide 5239
A for about one second to cycle through the summer
2. Hold down
time settings as shown below.
A
AUTO
3. After the setting is way you want, push the crown back in.
E-40
2. Change the Home City settings, if you want.
For details about these settings, see steps 2 and 3
under "To confi gure Home City settings" (page E-36).
C for about one second until the watch
3. Hold down
beeps and the x Second Hand moves to 12 o'clock.
This indicates the manual time setting mode.
In the following steps, each press of C cycles
between settings as shown below.
Home city/DST
C
Hour/Minute
C
Year Month
C
E-42

To change the current day setting manually

1. Pull out the crown.
This will cause the x Second Hand to move to the city
code of the currently selected Home City.
C for about one second until the watch
2. Hold down
beeps and the x Second Hand moves to 12 o'clock.
This indicates the manual time setting mode.
C twice. This will enter the day setting mode.
3. Press
The n Day Indicator will move slightly to indicate the
setting mode.
4. Rotate the crown to adjust the day setting.
E-44
8. Rotate the crown to adjust the year setting.
If you want to change the time setting at this time, press C and then perform
the procedure starting from step 4 under "To change the current time setting
manually" (page E-41).
0
1
2
3
9
4
8
7 5
6
Year setting (ones digit)
E-46

Checking the Current Time in a Different Time Zone

You can use World Time to view the current time in one of 29 time zones around the
globe. The currently selected city is called the "World Time City".
Hands and Indicators
NYC (NEW YORK)
z Hour Hand: Indicates the hour of the current time in the
World Time City.
x Second Hand: Indicates the current World Time City
c Minute Hand
b Lower Dial Hand: Points to WT.
n Day Indicator
Pressing A causes the x Second Hand to move to the
current World Time City for about three seconds.
E-48
A
STD DST
A
C
Hour
C
Day
C
00
10
20
30
90
40
80
70 50
60
Year setting (tens digit)
for about three seconds after the World
Time mode is entered.
Confi guring Current Time and Day Settings Manually
You can confi gure current time and day settings manually when the watch is unable to
receive a time calibration signal.

To change the current time setting manually

1. Pull out the crown.
This will cause the x Second Hand to move to the city
code of the currently selected Home City.
If you do not perform any operation with the crown
for about two minutes after pulling it out, crown
operations will become disabled and the hand will not
move if you rotate the crown. If this happens, push the
crown back in and then pull it out again.
TYO (TOKYO)
4. Rotate the crown to adjust the time (hour and minute) setting.
See "Using the Crown" (page E-3) for information about high-speed hand
movement.
The v Upper Dial Hand is synchronized with the z Hour Hand.
When adjusting the setting, check to make sure that the v Upper Dial Hand
correctly indicates an a.m. time or p.m. time.
If you want to change the day setting at this time, press C and perform the
procedure starting from step 3 under "To change the current day setting
manually" (page E-44).
5. After the settings are the way you want, push the crown back in to return to the
Timekeeping Mode.
This causes timekeeping to resume with the x Second Hand starting from
12 o'clock.
Dec
5. After the
Nov Jan
C. This will enter the month setting mode.
Oct Feb
The x Second Hand will move to the
currently selected month.
6. Rotate the crown to adjust the month setting.
Sep Mar
7. Press
mode.
The z Hour Hand will move to the number
Aug Apr
that represents the tens digit of the year
Jul May and the c Minute Hand will move to the
number that represents the ones digit. The
Jun
x Second Hand will move to 12 o'clock and
Setting the month stop there.
9. After the settings are the way you want, push the crown back in to return to the
Timekeeping Mode.
This causes timekeeping to resume with the x Second Hand starting from
12 o'clock.
Note
The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the day, there should be no reason to change
it except after you have the watch's rechargeable battery replaced or after power
drops to Level 3.
Important!
Time calibration signal reception is disabled while the watch is in the World Time
Mode.

To view the time in another time zone

C once to enter the World Time Mode.
1. In the Timekeeping Mode, press
The b Lower Dial Hand will move to WT.
To select the UTC zone as your World Time, simply hold down B for about three
seconds. No other operation is required.
2. Pull out the crown.
The x Second Hand points to the currently selected World Time city code.
The b Lower Dial Hand will indicate AUTO, STD (standard time) or DST
(daylight saving time), which indicates the current daylight saving time setting.
If you do not perform any operation with the crown for about two minutes after
pulling it out, crown operations will become disabled and the watch hands will no
longer move when you rotate the crown. If this happens, push the crown back in
and then pull it out again.
E-41
E-43
n Day Indicator stops moving, press
C. This will enter the year setting
E-45
E-47
E-49