Table of Contents
Advertisement
5. After all of the settings are the way you want, press A to exit the setting screen.
•
The DST indicator will be on the display while daylight saving time is turned on.
Note
•
After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ appears on the display.
When you release A (after ADJ appears), the second hand will be pointing at the currently
•
selected city code.
2. Press D.
•
This will cause the DST indicator to appear on the display along with the DST setting of the
currently selected Home City.
3. Press E to toggle the DST setting between daylight saving time (ON)
DST indicator
DST indicator
and standard time (OFF).
4. After all of the settings are the way you want, press A to exit the
setting screen.
•
The DST indicator will be on the display while daylight saving time
is turned on.
E-16
2. Press D to move the fl ashing in the sequence shown below to select the other settings.
City Code
DST
12/24-Hour
(page E-15)
(page E-16)
Format
Illumination Duration
Button Operation Tone
(page E-61)
On/Off (page E-65)
•
The following steps explain how to confi gure timekeeping settings only.
3. When the timekeeping setting you want to change is fl ashing, use E and/or B to change it as
described below.
Screen
To do this:
Toggle between 12-hour (12H) and 24-hour (24H)
timekeeping.
Reset the seconds to 00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Change the hour or minutes
Change the year
Change the month or day
E-18
Hand Home Position Adjustment
Strong magnetism or impact can cause the hands of the watch to go out of alignment.
•
Home position adjustment is not necessary when the analog time and digital time are the same time in
the Timekeeping Mode.
To adjust home positions
1. In the Timekeeping Mode, hold down A and keep it depressed for
about fi ve seconds until H.SET appears on the display.
When you release A after H.SET appears, the second hand will
•
move to 12 o'clock and 00 will fl ash on the digital display. This
indicates the second hand home position adjustment mode.
•
Though ADJ will appear on the display about two seconds
after you hold down A, do not release the button yet. Keep it
depressed until H.SET appears.
•
Home position adjustment is performed in the following sequence:
second hand, current time hour and minute hands, Dial Hand 1
Dial Hand 1
Dial Hand 1
Dial Hand 2
Dial Hand 2
(mode hand) and Dial Hand 2 (Tide Graph).
2. Use D to select the hand (s) you want to adjust.
•
The selected hand (s) will move to 12 o'clock, and the display will show the information below.
Display
Selected hand
Flashing 00
Second hand
Flashing 0:00
Hour and minute hands
Flashing SUB 1
Dial Hand 1 (Mode Hand)
Flashing SUB 2
Dial Hand 2 (Tide Graph)
E-20
Using the Digital Compass
You can use the Digital Compass Mode to determine the direction of north, and to check your bearing to a
destination.
•
For information about what you can do to improve digital compass reading accuracy, see "Calibrating
the Bearing Sensor" (page E-25) and "Digital Compass Precautions" (page E-32).
To perform a digital compass operation
1. Place the watch on a fl at surface. If you are wearing the watch, make sure that your wrist is horizontal
(in relation to the horizon).
2. Point the 12 o'clock position of the watch in the direction you want to check.
3. In any mode (except a setting mode), press C to perform a digital compass operation.
•
This will cause the mode dial hand to move to COMP.
•
After about two seconds, the second hand will point in the direction of magnetic north, and the
display will show the direction or the bearing angle that 12 o'clock is pointed.
Press A to toggle the display between the direction and the bearing angle.
•
E-22
Operation Guide 5442 5443
Seconds
Hour
Day
Month
Do this:
Press E.
Press E.
Use E (+) and B (–).
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-20).
To change the current time and date settings
1. In the Timekeeping Mode, hold down A until ADJ appears on the display.
When you release A (after ADJ appears), the second hand will be pointing at the currently
•
selected city code.
City code
City code
4. After all of the settings are the way you want, press A to exit the setting screen.
Note
Minutes
•
For information about selecting a Home City and confi guring the DST setting, see "Confi guring
Home City Settings" (page E-15).
•
While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from
noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,
Year
time is displayed from 0:00 to 23:59, without any P (PM) indicator.
•
The watch's built-in full automatic calendar makes allowances for different month lengths and leap
years. Once you set the date, there should be no reason to change it except after you have the
watch's battery replaced.
•
The day of the week changes automatically as the date and/or year changes. Make sure that your
date and year settings are correct.
•
Refer to the pages shown below for more information on Timekeeping Mode settings.
- Button operation tone on/off: "To enable or disable the button operation tone" (page E-65)
- Illumination duration setting: "To change the illumination duration" (page E-61)
•
If the selected hand does not move exactly to 12 o'clock, perform step 3 below to adjust it.
•
The watch will return to regular timekeeping automatically if you do not perform any operation for
about two or three minutes. Any changes you have made to settings up to that point will be saved.
3. Use E (+) and B (–) to adjust the position of the currently selected hand.
•
Holding down either button will cause the hand to move at high speed. Once started, high-speed
hand movement will continue even if you release the button. To stop high-speed hand movement,
press any button.
•
The second hand and dial hands will automatically stop high-speed movement after they complete
one revolution. The minute hand will stop automatically after 12 revolutions.
4. Press A to exit home position correction and return to regular timekeeping.
Note
After performing home position adjustment, check to make sure that the analog hands and the display
indicate the same time. If they do not, perform home position adjustment again.
Objective
•
See "Digital Compass Readings" (page E-24) for information about how direction readings are
indicated by the watch.
4. To return to the mode you were in immediately before entering the Digital Compass Mode, press D.
To enter the Timekeeping Mode, hold down D for at least two seconds.
Bearing to Objective:
Northwest
N: North
E: East
Bearing Angle to
W: West
North
Objective
S: South
E-17
E-19
E-21
Bearing Angle
Meaning
315°
0°
E-23
Hide quick links:
Advertisement
Table of Contents
