Activate Batteries And Set-Up Wizard - BT BT4500 Quick Setup And User Manual

2 Activate the batteries and
follow the Set-up wizard
1. Activate the batteries by pulling the plastic tab
away from the back of the handset.
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 24 hours before use.
2. The Power on animation will start up and then the
handset will check for a link with the base station,
once found the screen will show
. The set-up wizard will take you through the
date
steps for: setting the time and date, recording your
outgoing message for the answer machine, using
Caller Display, setting call blocking and adding
contacts to your phonebook.
Select by pressing the Left option button if you
Yes
want to follow the set-up wizard prompt or select
by pressing the Right option button to continue
No
to the next prompt until set up is complete.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
1666 BT4500 UG [5].indd 5
Set time and
Quick set-up guide Quick set-up guide
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 16 hours talk time or
180 hours standby on a single
charge. (This doesn't mean you
can unplug the base or leave
the handset for this length of
time without charge).
Please note that new Ni-MH
rechargeable batteries don't reach
full capacity until they've been in
normal use for several days.
Battery Low warning
The icon will flash, you'll
see the message
Battery
in the display and hear a
Low
warning beep every minute,
to indicate that you need to
recharge your handset. You can
remove the display message by
selecting . If the battery
Hide
charge completely runs out,
the display will show
Charge
. You must recharge
Batteries!
the handset batteries before
you can use the handset. If the
charge completely runs out the
handset will switch off. Place
the handset on the base or
charger to charge.
5 5
09/04/2013 15:04