SMC Networks SMCGS805 User Manual page 18

2
H
P S
ORT AND
The switch contains one power LED, one loop LED for the device, and Link/Act
LEDs for each port.
Refer to the following table for LED definitions:
Figure 4: Front Panels
Table 1: System and Port Status LEDs
LED Condition
PWR On Green
Off
LOOP On Red
Off
Link/Act On Green
(10/100M)
Flashing Green
Off
ARDWARE
S
YSTEM TATUS
D
ESCRIPTION
LED
S
Status
The internal power supply is operating normally.
The unit has no power connected.
The switch has detected a loop condition and
disabled the appropriate port. When the loop
clears, the LED will turn off.
The switch has not detected a loop condition or
the current loop condition has cleared.
Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
Flashing indicates activity.
There is no valid link on the port.
– 18 –